Instapower Limited, Delhi
Home   |   Management   |   What is ESCO?   |   Career   |   Contact  |   Enquiry
About Instapower Insta Power Clientele Insta Power Certifications
Insta PowerLED street lights, LED lights manufacturer
Our Products
Home Home » Street Light
INSTAPOWER EMPANELLED WITH BEE AS AN ESCO ORGANIZATION
Insta PowerStreet Light
Instapower offers quality street lighting system based on LED technology. In these LED street lights, the light source is Light Emitting Diode and light output is white color, peak intensity 58 lux in model 1 and 78 lux in model 2 when measured from a height of 10 ft and illuminated over an area of at least 70 sq. ft.

Our street lighting system utilizes high quality LEDs imported from Agilent (USA), Nichia (Japan). The average duty cycle is dusk to dawn and autonomy is 4 days.

The light source is housed in a water resistant assembly and multiple LEDs can be used. The light output from the light source is kept constant. There is no linear variation with changes in the input battery voltage, i.e. 10.5 V DC-13.5 V DC

SMF battery is used, which has a life of 2-3 years. 75 % of the rated capacity of the battery should be between fully charged & load cut off conditions.

Duty Cycle:
The LED street lighting system is designed to be automatically switch ON at dusk, operate throughout the night and automatically switch OFF at the dawn. It is under the average daily insolation of 5 KWh /sq.m. on a horizontal surface.
LED Street Lights
Specifications

Electronics
  • We ensure that the total electronic efficiency should be at least 85 %.
  • We ensure that the idle current consumption should not be more than 1 mA.
  • Necessary lengths of wires/cables and fuses provided.
  • The PV module will be used to sense the ambient light level for switching ON and OFF the lamp.

PV Module
  • The PV module(s) contain crystalline silicon solar cells.
  • The PV Module voltage = 12VDC
  • The terminal box on the module has the provision for opening for replacing the cable
  • A strip containing the following details is laminated inside the module so as to be clearly visible from the front side:
LED Street Lights
Electronic Protections
  • Adequate protection incorporated under no load conditions,
    e.g. when the lamp is removed and the system is switched ON.
  • The system has protection against battery overcharge and deep discharge conditions.
  • LEDs are protected using a special patent applied technology.(LPM Technology)
  • We ensure that the fuses are provided to protect against short circuit conditions.
  • A blocking diode, is provided as part of the electronic protection to prevent reverse flow of current through the PV module, in case such a diode is not provided with the solar module.
  • Protection against open circuit, accidental short circuit and reverse polarity provided.


Mechanical Hardware
  • A metallic frame structure (with corrosion resistance paint) to be fixed on the pole to hold the SPV module. The frame structure have provision to adjust its angle of inclination to the horizontal between 0 and 45, so that the module can be oriented at the specified tilt angle.
  • A vented, acid proof and corrosion resistant painted metallic box for outdoor use is provided for housing the battery.
  • The pole is made of mild steel pipe with a height of 4 metres above the ground level, after grouting and final installation. The pole has the provision to hold the weather proof lamp housing. it is painted with a corrosion resistant paint.


Salient features
The system is provided with 2 LED indicators - a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glows only when the battery is actually being charged.



Insta Power India Insta Power India



Insta PowerStreet Tube Light
Through manufacturing and supply of superior quality fluorescent tubelights, Instapower has become synonymous with energy saving lighting. Along with our collection of LED based, low cost lighting products; Instapower offers energy saving - Insta - T5* Street Tubelight (2x14W, 4x14W & 2x24W). Easy to retrofit in existing FTL installations, our tubelights come with an electronic ballast and variety of other features which give outstanding performance. These are available at affordable cost, save abundant electrical energy and leads to huge savings.
Aviation Light
Technical Specifications
  • Over 30% increased savings in power.
  • Lasts upto 15,000 hours more than standard fluorescent lamps.
  • Tri-phosphor coatings consistently provide a consistently high level v high significant energy saving.
  • Operates from 80V AC - 300V AC.
  • Total Harmonic Distortion < 20%.
  • Power factor : 0.950.
  • Instant Soft Start.
  • Open lamp and filament protection.
  • Colour Temperature: 4000K-5000K.
  • Special flexible clamps for luminary fitting.
  • Special high grade Fire Retardant PVC
  • Comes with special dual prismatic cover for anti-glare effect.
  • Available size: 2'.
  • Available in 2x14W, 4x14W & 2x24Watts.
  • Power Consumption : 56W (4x14w).
  • Light Intensity : 570 cd @ 1 Meter.
  • Available Colours: Cool White (4000K), Natural Daylight (6000K), Warm White (3500K).
  • Minimum maintenance.
  • Comes with one year warranty.



Insta Power India Insta Power India
Insta Power India

Product Range
Aviation Light Headlamp LED Flash Light Solar Delineator Solar Barrier Light
Solar Road Stud Landscape Lighting T5 Tube Light Signages Street Light
Street Tube Light Traffic Light Solar Home Light Solar Lantern (LED)  


Member IndiaMART.com

Aakash Cilil Works Pvt. Ltd.
Aakash Cilil Works Pvt. Ltd.